Launch offer: 30% off everything until November 30 with code LAUNCH30, applied automatically at checkout.

How to Use SVG Patterns in Cricut Design Space

To use an SVG pattern in Cricut Design Space, upload the file through the Upload option, add it to your canvas, then decide whether it will be cut as vinyl or paper layers, or printed with Print Then Cut. For printed patterns, the easiest route is often to upload a pattern image as a pattern fill and apply it to any shape. Menus change between versions, so treat these steps as a general guide.

First, decide: cut or print?

Patterns can be used two very different ways on a cutting machine:

ApproachWhat happensGood for
CutEach shape in the SVG is cut from materialSimple, bold patterns in vinyl or paper
Print Then CutYour home printer prints the pattern, then the machine cuts the outlineDetailed, multi-color patterns, stickers, tags

Busy seamless patterns with many small motifs are usually much better as Print Then Cut. Cutting hundreds of tiny shapes takes a long time, dulls blades and creates a lot of weeding.

Uploading an SVG

  1. Open Design Space and start a new project.
  2. Click Upload, then choose to upload an image.
  3. Select your SVG file. Vector files keep their shapes and layers.
  4. Name and tag it, save it, then add it to the canvas.

Once it is on the canvas, the Layers panel shows each part of the design. A pattern SVG may arrive as many separate layers.

Turning an SVG into a printable pattern

If you want to print the whole pattern, you need Design Space to treat it as one printed image rather than many cut paths.

  1. Select all the layers of the pattern.
  2. Set the operation to a print option rather than basic cut.
  3. Use Flatten so the layers become one printable image.
  4. Add a shape on top, such as a circle or tag outline, select both and use Slice or Attach to get the outline you want cut.

Experiment on a scrap print first; the exact combination of tools can vary depending on how the SVG was built.

Using patterns as a fill

Design Space can fill a printable shape with a pattern, which is often the simplest way to use a seamless design.

  1. Upload your pattern as an image, using the option for uploading a pattern if your version offers one. A JPG or PNG tile is usually what this expects.
  2. Add a shape or text to the canvas.
  3. Change the operation to a print type, then choose Pattern as the fill.
  4. Pick your uploaded pattern and use the edit options to adjust scale, position and rotation.

Because the pattern is seamless, it fills the shape without joins, whatever size you make it.

Print Then Cut tips

  • Check the maximum size. Print Then Cut has a size limit that depends on your machine model and paper setting. The app will tell you if your design is too big.
  • Calibrate first. If cuts are slightly off the printed edge, run the calibration in Design Space.
  • Use matte paper or sticker paper. Very glossy surfaces can make it harder for the sensor to read the registration marks.
  • Turn off bleed only if you need to. Bleed adds a little extra printed color around shapes so the cut does not leave a white edge.

Cutting a simple pattern from vinyl

If you do want to cut a pattern, keep it simple:

  • Choose bolder motifs with fewer, larger shapes.
  • Delete motifs that are cut off at the edges if you do not want tiny slivers.
  • Use Weld to merge overlapping shapes of the same color, which reduces the number of separate cuts.
  • Use Attach to keep shapes in position relative to each other on the mat.

Example: patterned gift tags

  1. Upload a seamless pattern tile.
  2. Add a tag shape about 2 x 3.5 inches.
  3. Set it to print, choose Pattern as the fill and select your tile.
  4. Add a small circle for the string hole, select both and Slice.
  5. Duplicate tags to fill the printable area, then send to print and cut on cardstock.

Common mistakes

  • Cutting a complex pattern that should have been printed, leading to hours of weeding.
  • Forgetting to Attach or Flatten, so pieces scatter across the mat.
  • Uploading low-resolution images for printed fills, giving blurry results.
  • Ignoring the license. Check whether the pattern can be used for items you sell.

Once you know when to cut and when to print, seamless patterns open up a lot of easy projects, from stickers to party decor.

Skip the blank page

The Clay Seamless Pattern Pack has all of this laid out and ready to edit. $3.50, instant download.

Get the Clay Seamless Pattern Pack

Related guides